Can anyone help me to fix freezing while booting issue on my Lenovo
ThinkPad T400. I have bought this one year ago and I have installed the
windows XP. Everything working properly without any Toshiba Satellite Pro M300 AC Adapter issue but recently
mine machine started freezing while booting. Please help me to solve
this issue.. I can’t even start the laptop not just freezing and stuck
while booting .
The computer does not start, LED lights will not turn on, the display
goes blank when performing one or more of the following non-powered and
can be resolved. The AC adapter plug is not damaged and that work is
properly connected to the wall outlet to confirm. AC adapter, wiring
and pin connections are not damaged; check the Toshiba Satellite Pro L300D AC Adapter power is connected to
the system board. If AC power is connected to the system board LED
illuminates your keyboard. AC adapter or power pin of the connector is
damaged as a component of HP accredited service may be required.
Startup problems, and the LED lights on the keyboard blink a few times
or if you hear a beep will perform the following tasks: Press the power
button on your keyboard to turn on the computer and find the blinking
LED lights will hear a dial tone. Flashing or beeper number of a series
of calculations. Flashing or beeper after a series of a few seconds
pause Toshiba Satellite M300 AC Adapter and continuous blinking or tones are repeated (typically three
times). After a series of repeated blinking LED on the power button is
pressed again.
Backside of the LCD display light problem or if the display is corrupted
graphics driver to empty, but may be on the notebook. In this case,
connect an external monitor to test the display. To resolve this, turn
on the Toshiba Satellite M200 AC Adapter and press F8 and then enable low resolution video
(Enable low-resolution video), select Low-resolution images on the LCD
display is marked with the latest drivers for your specific graphics
drivers can be downloaded and installed. If you do not see an image on
the notebook to HP for technical assistance.
Attempting to start the computer seems to stop responding when the
internal connection may be loose. In general, the memory module or
bootable hard drive or disk is installed incorrectly, or the same
hardware components, the component is not compatible with your computer,
or when the Toshiba Satellite U200 AC Adapter is dropped or a loose connection will be
confronted. Each of the following actions then try restarting the
computer.
If your laptop will not boot correctly first you must perform a hard
reset. When you perform a hard reset will solve many problems. If your
computer still does not start properly, select from the list below and
symptoms is recommended to proceed with corrective action. Disconnect
all peripheral devices to connect USB devices and SD media card
Disconnect all. This accessory is not because the computer is being
tested. Disconnect the Toshiba Satellite P200 AC Adapter, remove the battery and then
press the power button for 15 seconds or longer to consume all remaining
power to restore the default setting. Reconnect the AC adapter
(battery is not inserted), press the power button near the Caps Lock and
Num Lock key LED lights up in the fan or other moving parts, rotating
browse listen for the sound.